Snorkel MB20N-sn0001-0131 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Machines spéciales Snorkel MB20N-sn0001-0131. Snorkel MB20N-sn0001-0131 User Manual [ru] [de] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Operators Manual
WARNING
All personnel shall carefully read, understand and follow all safety rules and operating instructions
before operating or preforming maintenance on any UpRight aerial work platform.
SAFETY RULES
PROHIBITED: Use of this machine without tting of the fall restraint to the person and anchor point and use of the
machine with the platform safety drop-bar in the raised position.
PROHIBITED: All persons, other than those in the platform, from approaching within 1 metre of the machine.
DO NOT operate this machine without rst having surveyed the work area for surface hazards such as holes, kerbs,
bumps and debris.
PROHIBITED: Platform working loads in excess of 215 kg , (max. 2 persons ).
DISTRIBUTE all loads evenly on the platform.
PROHIBITED: Fitting of such items as sign-boards, ags or ropes etc. to the cage or jib.
PROHIBITED: Operation of the machine without prior safety training , use by medically unt persons or by persons
who have not read and fully understood the operating instructions in this manual.
PROHIBITED: Driving of this machine on soft, uneven ground or on oors with a localised bearing capacity of less
than 15 kg/cm2 (213 psi).
PROHIBITED: Use of this machine in winds exceeding 27 mph (12.5 m/s - Beaufort Force 6)
PROHIBITED: Use of ladders or scaolding on the platform.
PROHIBITED: Attachment of overhanging loads; size increasing of the working platform; use of this machine as a
crane or for any other application involving additional loads or forces.
PROHIBITED: Any changes or modifactions to the operating or safety systems.
INSPECT the machine thoroughly for missing decals, cracked welds, loose hardware, hydraulic leaks, damaged cables,
loose wire connections or wheel bolts. DO NOT use damaged equipment. (Contact UpRight Irl. Ltd. for instructions).
PROHIBITED: Climbing down any elevating assembly with the platform elevated.
PROHIBITED: Servicing while the platform is elevated unless rst blocking/supporting the elevating assembly.
PROHIBITED: Recharging of batteries near open ames or at a source of sparks.
PROHIBITED: Replacement of any component or part with anything other than original UpRight replacement parts
(unless specically agreed by the manufacturer.
PROHIBITED: Unattended storage (long or short term) of the machine with the Platform in the raised position or with
the Brakes disengaged.
PROHIBITED: Use, other than emmergency down functions, of the machine while the alarm sounds.
THIS MACHINE IS NOT
INSULATED.
Operation of this ma-
chine within 3 metres of
power lines or cables is
PROHIBITED .
DO NOT operate the
mast or drive with the
platform elevated unless
on a rm and level
surface.
NEVER position the
platform without rst
checking for overhead
obstructions or other
hazards.
Sitting, standing or
climbing on the platform
rails is PROHIBITED .
Safety Rules and Operating Instructions
Safety Rules and Operating Instructions
MB 20N SERIAL No. 0001 TO CURRENT
MB 26 SERIAL No. 0001 TO CURRENT
MB20/26
Vue de la page 0
1 2 3 4 5 6 ... 15 16

Résumé du contenu

Page 1 - Operators Manual

Operators ManualWARNINGAll personnel shall carefully read, understand and follow all safety rules and operating instructionsbefore operating or prefo

Page 2 - Introduction

OperationMB20NMB263.2The pre-operation safety checks should be carriedout prior to operation. These checks are detailed inthe previous section. Oper

Page 3

OperationMB20N/MB26Table 1: Controls and IndicatorsPage 10Upper Control ConsoleMAIN KEYSWITCHWithdraw key from ‘Platform’ position on the LowerConsole

Page 4 - Transportation

OperationMB20NMB263.3Table 2 : Controls and IndicatorsPage 1112345Lower Control ConsoleMAIN SELECTORSWITCHTurn key to ‘Off’ position and remove - dis

Page 5

OperationMB20N/MB26Travel with platform elevated ONLY on firm and levelsurfaces.NOTE:The Work Platform will travel at reduced speed when inthe elevate

Page 6

OperationMB20NMB26Emergency Lowering (by hand)EMERGENCY SITUATIONSin any emergency situation, the immediate action isto push the red “Emergency Stop”

Page 7

14NOTES:

Page 8

MB26 ANSI SPEC31 in.x 29 in.Inside Toeboards474lbs2 people32ft26ft22.6ft5325lbs39in6.5ft8.5ft1.9mph0.43mph4 No. 6V x 375 Ahr Battery24 Volt DC2

Page 9 - Safety Inspection

IntroductionMB20N/MB26SCOPEThis manual includes the procedures andresponsibilities for the inspection, transportation,preparation and safe operation o

Page 10 - Operation

Introduction MB20N/MB26DRIVE & STEER SYSTEMAn electronic controller, mounted in the chassis, isp

Page 11

TransportationMB20N/MB262.0 2 Hoisting By CraneThe MB20/26 may be lifted by an overhead hoist/crane subject to the following strict procedure.Raise t

Page 12

TransportationMB20N/MB262.63 Transport By TruckThe MB20/26 can be carried on a suitably ratedtransportation vehicle or trailer. Because of its highg

Page 13

TransportationMB20N/MB262.76. On completion of towing or winching, reverse theposition of the rotary hand valves A and B.The handpump becomes ino

Page 14

NOTEVehicles fitted with the automated battery top-up system with shut-off valve, top up the battery cells with distilled water using the electrolyte

Page 15

or heavy scoring. Replace as necessary.

Page 16 - FOR MORE INFORMATION

Safety InspectionMB20N/BM2612. MACHINE TRAVEL - UNELEVATEDTravel functions are possible only from theplatform Upper Control Station. As with all such

Commentaires sur ces manuels

Pas de commentaire