Snorkel S3010E Manuel d'utilisateur télécharger pdf (Page 22)

Chapter 7 – Controls

18 S3010E - 514226-000-ANSI

Platform Raise/Lower Switch

The platform raise/lower switch is used to raise or lower

the platform. The switch is spring returned to the center

off position.

y Hold the switch upward to raise the platform.

y Hold the switch downward to lower the platform.

y An alarm will sound as the platform lowers.

Upper Controls

The upper controls (refer to Figure 7.3) are located on the

control panel in the platform. Platform and drive functions

can be operated from the upper controls.

Figure 7.3 – Upper Controls

Warning

The potential for an accident increases from improp-

erly driving or steering the aerial platform. Death or

serious injury could result from such accidents. Make

sure the upper control panel is facing the front of

the platform, hooked on the guardrail, and hanging

inside the platform.

Avoid driving the platform with the upper controls facing

the rear or side of the machine. In this position the ma-

chine is difcult to control because the drive and steer

control movements and their resulting machine move-

ments will not correspond.

Only operate the upper controls when the panel is facing

the front of the platform ( entry gate ), securely fastened

on the guardrail inside the platform (Refer to Figure 7.4).

Figure 7.4 – Upper Control Operating Position

The following controls are located on the upper control

panel:

y Emergency stop button

y Drive/lift selector switch

y Joystick to control platform lift, drive, and steer

y Horn Button

y Interlock Switch

The battery condition indicator display is also be located

on the upper control station side (LCD).

Emergency Stop Button

The emergency stop (refer to Figure 7.3) is a two-position,

red push button on the front of the upper control panel.

y Push the button inward to disconnect power from all

control circuits at the upper controls.

y Pull the button outward to restore power.

y Push the emergency stop button inward when the

upper controls are not in use to protect against unin-

tentional operation.

Note

The lower controls override the upper controls. If the

upper control emergency stop is engaged the lower

controls can still be used to operate the aerial platform.

Push the button in when the upper controls are not in use

to help protect against unintentional platform operation.

Drive/Lift Selector Switch

The drive/lift selector switch (refer to Figure 7.3) is used

to select either machine drive or lift functions. Both func-

tions can not be operated at the same time.

y Place the drive/lift selector switch in the drive position

to drive the aerial platform using the joystick. The

platform will not raise or lower while driving.

y Place the drive/lift selector switch in the lift position to

raise and lower the platform using the joystick.

Horn

Interlock Switch

(on joystick)

Top Guardrail

Upper Controls

Entry Gate

Guardrail Fastener

Battery Warning

LED

Joystick

Emergency

Stop Button

Drive/Lift

Selector Switch

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Snorkel S3010E Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Snorkel S3010E