Snorkel TL49K-sn8000 Manuel d'utilisateur Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 184
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
4 508159-000 TL49K
The UpRight TL49K is of the parallel linkage vertical boom design, mounted on a
road towable trailer. The unique, yet very simple boom configuration gives the
maximum safety and control ability combined with a robust construction to
withstand a heavy working environment
The TL49K machine is designed for two man capacity (200 kg S.W.L.).
The machine incorporates a bottom boom with tie-rod, a short vertical boom and a
top boom with a telescope section. The TL49K also has an independent
hydraulically operated flick-out boom and rotating cage for extra manoeuvrability.
The hydraulic system is of a failsafe design throughout, with built in hydraulic lock
valves on all of the rams as a precaution against hose failure. The machine is
controlled by means of proportional manual controls of the ‘direct hand’ lever
operating type. These valves are located at both the base and in the cage, as
standard.
Electrically operated emergency lowering valves are fitted as standard to allow the
machine to be lowered from the base and basket.
The hydraulically operated outriggers are fitted with load sensing interlocks, to
prevent the booms from being raised without the outriggers being extended and
under load. An interlock prevents the hydraulic outriggers being accidentally
retracted while the booms are raised. A simple system of warning lights show the
power supply is on and each of the outriggers is under load.
Performance.
Maximum Working Height 17.00 m
Maximum Working Outreach: 9.10 m
Capacity (2 man working): 200 kg
Slewing Arc: 680°
Airborne Noise Emissions (Battery): 70 dB(A)
Construction Standards.
The machine complies fully with the requirements of the following EEC Directives:
Directive 98/37/EC – the ‘Machinery Directive’.
Directive 89/336/EEC – the ‘Electromagnetic Compatibility Directive’.
Directive 73/23/EEC – the ‘Low Voltage Directive’.
EN 6020-1/1993 ‘Safety of Machinery.’
The machine is designed and tested in accordance with all relevant B.S.I and
European Standards including EN280.
DESCRIPTION OF EQUIPMENT
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 183 184

Commentaires sur ces manuels

Pas de commentaire